Cordless Single Cellular Blackout Shade

These single cell blackout cordless cellular shades are perfect for homes with small children or pets; no cords to get tangled in! This shade has it all: insulation, privacy, great looks and safety at an affordable cost. Its unique honeycomb construction provides excellent insulation and sound absorbtion while the blackout fabric diffuses light and provides complete privacy. Both easy to install and operate! Simply push up or down on the integrated control handle on the bottom rail to move your shade to your desired position.


  • 9 colors available
  • Cordless comes standard; no cords for children or pets to get tangled in
  • 100% Polyester fabric, with metalized Inner lining
  • Metalized inner layer provides 100% light Blockage and increased energy efficiency
  • Integrated headrail bracket and headrail system for a seamless appearance and easy installation
  • Limited 3 Warranty and Free Shipping
  • Easy to maintain; requires only occasional dusting or vacuuming

starting at: $101.86




  • Mounted within the window frame
  • A clean, uncluttered look
  • For mounting depth requirements, refer to our “Specifications” tab online for each product you are ordering.

Choose your mount Inside


  • Shade is mounted to the wall, ceiling or molding around the window.
  • Makes window area appear larger; helps hide unattractive windows or molding.
  • No minimum depth requirement.
  • Requires at least 2” of flat space above window molding for mounting brackets.

Choose your mount Outside



  • Step 1: Measure the inside width at 3 places: the top, middle and botom. Round down to the nearest . Enter the smallest measurement on your worksheet. This is your ordering width. (Blindsgalore takes necessary deductions.)
  • Step 2: Measure the height at 3 places: left side, middle and right side. Round up to the nearest . Enter the longest measurement on your worksheet. This is your ordering height.

Measure Your Window Inside


  • Step 1: Measure the width of the area you want to cover. We recommend adding 3 inches (1½” on each side) to help eliminate light gaps and ensure privacy. Enter this width on your worksheet; it is your ordering width and the width of the shade (no deductions will be taken).
  • Step 2: Measure the height of the area you want to cover including any extra overlap. Enter this height on your worksheet; it is your ordering height and the height of your shade (no deductions will be taken).
  • Note: The bottom panel is used as the adjustment panel to get the finished shade height. The bottom panel length will vary depending on the total shade height – shades of differing heights in the same room may have a different look. This is an important consideration when hanging shades of different heights in the same room.

Measure Your Window Outside